• Sitemap
  • Japanese
GPS Receiver Modules
Home > Products > GPS Equipments > GPS Receiver Modules > GT-8031

GPS Receiver Modules GT-8031

Integrity is further improved because of its SBAS (WAAS) capability in addition to traditional T-RAIM (Time-Receiver Autonomous Integrity Monitor) function. Several new command sets have been added for easier use.

PPS output mode is available. For example, in "always output mode", 1PPS is output without satellite signals using the receiver's internal timing (no UTC synchronization). In "fixed observation point mode", one satellite signal is enough to output UTC synchronized 1PPS. application is infinite.

Characteristics

  • Low cost but powerful, fast 16 Channel GPS receiver
  • Accuracy is not sacrificed 15 nanoseconds with regard to UTC (1 sigma).
  • Low power consumption (58mA@3.3VDC) at full tracking satellites
  • RF pig tail cable with popular connector already soldered for easier, more cost-effective installation.
  • Almanac uploading and downloading.
  • Autonomous transition from "Survey" to "Fixed Observation Point" lets the receiver calculate its position and then use the averaged position as the fixed observation point.
  • "Back to fixed position set" allows you to go back to the fixed position even after power-off.

Specifications

Numbers of channel 16 channels
Position-Fixing System All-In-View SPS (DGPS RTCM-SC104)
Frequency 1575.42 MHz
Tracking capability 12 Satellites simultaneously including 1 WAAS supporting channel
Number of Parallel Searches 16
Protocol NMEA-Like
WAAS Support 1 Channel
Uses DGPS and functions to deselect unhealthy satellites
GPS-Fix data Renewal Rate 1 Second
1PPS Output UTC-Synchronized (1 pulse / second)
Acquisition / Tracking Specifications
Initial Acquisition Time 8.4 seconds Hot Start (Open Sky)
36 seconds Warm Start (Open Sky)
44.9 seconds Cold Start (Open Sky)
Re-acquisition Time 2 seconds
(-127 dBm or stronger signal interrupted for 10 seconds or less)
Horizontal Accuracy (2 drms) 5.6 m
Vertical Accuracy (2 drms) 7.3 m
Power Supply
Supply Voltage / Current Voltage: 3.0 to 3.6 VDC
Current: Max 72 mA at 3.6 VDC
External Back-up power Voltage: 2.1 to 3.6 VDC
Current: 200 uA when VCC = 3.6 VDC
Ambient Conditions Operating temperature: -30 - +80 degree
Storage temperature: -40 - +85 degree
Dimensions 20.8 mm (W) x 33.8 mm (D) x 6.3 mm (H)
Mass 8 g

Measurements

Page Top
Copyright © Furuno Electric Co., Ltd. All Rights Reserved.